R&D

3D
  • Etching surface structures on tubes.
  • Surface structuring 3D parts with a tolerance of +/- 2,5 µm.

 

Beryllium
  • Etching 0,2 mm pure beryllium grids.

 

Gold
  • Etching 13 µm gold-foils.

 

Laminates
  • Etching & lasercutting specific designs on stainless steel - polyester laminates.

  • Etching & lasercutting coils for micromotors on copper - polyimide laminate.

 

Molybdenum
  • Etching of 15, 25 and 50 µm grids.

 

Nickel
  • Electroforming of 5 µm foil with holes of 2 ± 0,2 µm and a pitch of 5 µm.

 

Stainless Steel   
  • Etching 3 µm stainless steel foils.
  • Process optimization for producing products from 10 μm stainless steel with a tolerance of ± 1 μm.

 

Titanium
  • Etching 6 µm grids.
  • Etching 40 μm membranes.
  • Etching 0,7 mm thick sheets of 600 x 600 mm.
  • Etching 1  mm thick sheets.

 

Special alloys   
  • Etching 25 µm Vitrovac 6025 foils
  • Etching special alloys: CuAg2, AgCu28, AgCu28Ni0,7, AgCu28Ge2Co0,3 and SnAg3Cu0,5Co0,1.